Why Doesn't the System Print the Bottom Stub on My Design-Your-Own AP Laser Check?

To resolve this issue, I recommend using the Elliott Standard Laser Check instead of the DYO check if you haven't yet printed the new check form.

2.    If you still prefer to use the DYO check feature, make sure you've defined the correct line numbers:

a.    Form# is the key for Top/Bottom check stub repeating. This is hard coded in the system. For example, Form number #0142 Laser CHK, means that the top stub will start on line 01 and the bottom stub will repeat on line 42.

b.    Check Total and Vendor Total indicate the lines on the top stub (i.e., line 19).

c.    Bottom Stub is not necessary to define; it will repeat beginning on line 42.

                   

• Related Articles

• AP Laser Check Layout

  Release Date: 12/4/2017 Q - I would like to phase out the old dot-matrix AP check and implement AP check printing on a laser printer. Can you provide a layout of an AP laser check so I can have my local printer produce them? Thanks. A - First, we ...

• DYO (Design Your Own) AP Laser Check Design

  Q - With DYO AP Check, how do I get the check stub lines on the top stub to repeat on the bottom stub to support the AP laser check format? A - Please follow these steps: The Form Number is the key for Top/Bottom check stub repeating. This is hard ...

• AP Check History Report That Includes Voided Check

  Q - Is there a flag that would allow me to view all AP checks including voided checks and the original checks that were voided?. A - Under A/P -> Reports -> Check History Report -> Print, there are three different kinds: Check History Report All ...

• ERROR 035 on AP TEMP CHK File

  Q: I get error message 035 on AP Temp Chk File when I try to print check from # 501235. My check printing worked properly at few hours ago. A: The system creates a file name the same as check# 501235 for the laser check second stub. Unfortunately, ...

• Install 2021 1099-NEC Laser Form Template

  Release Date: 12/02/2021 Version: 8.5 and Above The Elliott Accounts Payable module supports the printing of 1099-NEC forms. The 2021 1099-NEC is a standard IRS form so we believe you should be able to order from any source you prefer. There are ...