Payware PC Server Actively Refuses Credit Card Transaction

Payware PC Server Actively Refuses Credit Card Transaction

Q: When I process a credit card transaction in Elliott, I receive a message indicating the server is actively refusing the network traffic connection.  As a result, the credit card processing fails.  But if I go to the Payware PC credit card server, I can manually process the credit card transaction there.  What went wrong?

A: This is most likely caused by the firewall that blocks the network traffic. The firewall can be a physical firewall, or the Windows Firewall, if enabled. You can test this condition easily by entering the following command at the command prompt:
   
telnet pwpc-server 4532
(where pwpc-server is the machine name where your Payware PC is installed). Substitute that with the actual Payware PC server name or its corresponding IP address.  4532 is the default TCP port used by Payware PC software.

If the connection is successful, you will see that the screen is cleared.  If the connection is not successful, you will see a message like:
    
Connecting to pwpc-server...Could not open connection to the host, on port 4532:Connect failed.
If you do see this Connect failed message, it is most likely a firewall issue. You should talk to your IT department and request to open the port 4532 on the pwpc-server.

In Windows 7 and later versions, the telnet program is not installed by default. You will need to go to Control Panel, choose "Add Windows Feature," and add "Telnet Client" to use the telnet command.








    • Related Articles

    • Credit Card Transaction Time Out

      Q - When I process a credit card transaction in Elliott, I receive a message window with the title "Finished Transaction Status" and the detail message like followings: E:System.Net.WebException: The underlying connection was closed: A connection ...
    • How to Handle and Prevent Credit Card Duplicate Charges

      Release Date: 08/31/2018 How Did Credit Card Duplicate Charges Happen? Most of the time, duplicate credit card charges are caused by network (Internet) error. Elliott online credit card processing utilizes Payware Connect as the payment gateway. If ...
    • How to Reverse Credit Card Sales

      Q - What is the process to reverse out a credit card sale that hasn't been picked, invoiced, etc.? A - The following outlines the procedure depending on whether you had to delete the original order or keep the original order: If you deleted the ...
    • Feature - Online Credit Card Interface Level 3 Support

      Release Date: 4/21/23 Revised Date: 12/20/23 Version: 8.5 and Above Introduction Elliott currently supports credit card level 2 transactions. This means, in addition of passing the credit card number, expiration number info when charge a credit card, ...
    • Credit Card Processing Error: Chk Viawarp For Dupl

      Q - In A/R -> Processing -> Credit Card Trx Handle, at field "21. Approval No," I press F4 to interface with the credit card payment gateway server, then I receive the message "Credit: AP Error: Chk Viawarp For Dupl." See examples below: When I go to ...