Feature - Print Production Work Order by Customer Range

Feature - Print Production Work Order by Customer Range

Release date: 1/22/2021

Version 8.5 & Up

This project added "Starting Customer" and "Ending Customer" ranges to the BM -> Processing -> Print Production Work Orders -> Print -> Plus work order or Material Work Order selection screens. See sample screen below:

 


F7/F8 searches for Starting and Ending Customer are also provided.  Enter spaces for "All."


The primary purpose of this feature is to allow users to print a range of production work orders for a specific customer or range of customers. Keep in mind that only work orders that are copied from the COP orders will have customers.  If you are printing work orders not copied from the COP side, then you should choose "ALL" for the "Starting Customer" field.


Modified programs:  BM20S2, BM20P2, BM20S3, BM20P3, BM20P3T


DLM




    • Related Articles

    • BM2000 Bill of Material Print Production Work Orders

      BM2000 Bill of Material Print Production Work Orders ← Bill of Material / Work Order Plus Print Production Work Orders Application Overview The Print Production Work Orders application prints the physical work orders that instruct the production ...

    • Work Order Plus Production Manual 2

      Chapter 2: Create a Work Order Work orders in WO+ can assist with tracking production, but there are several ways to create the work order depending on the situation. Production Order Entry - The traditional way to create work orders, mostly to ...

    • BM1700 Bill of Material Production Order Entry

      BM1700 Bill of Material Production Order Entry ← Bill of Material / Work Order Plus Processing Production Order Entry Application Overview The Production Order Entry application allows the entry of production orders. These orders may be later ...

    • Work Order Plus Getting Started Document

      Work Order Plus Getting Started Document Chapter Index Chapter 1: Setup Environment 1.1 Chart of Accounts 1.2 Elliott Setup 1.3 Shop Setup 1.4 Product Setup 1.5 Other Setup Values 1.6 Conclusion Chapter 2: Placing Orders Chapter 3: Preparation for ...

    • Feature - Added "Print Labels" Function to Production Order Entry Screens

      Release date: 1/29/2021 Version 8.5 & Up This project added "Print labels" functions to all three Production Order Entry functions In Global Setup -> System -> Barcode printing setup, fields 24-26 have been added for the Work Order Label Print ...