BM1100 Bill of Material Gross Requirements Report

BM1100 Bill of Material Gross Requirements Report

BM1100 Bill of Material Gross Requirements Report

← Bill of Material / Work Order Plus

Gross Requirements Report

Application Overview

 

The Gross Requirements Report application prints a selected number of levels of components for a selected quantity of a parent item or items, summarizing for each component, the total quantity required at all levels.

 

It offers the option of blowing through phantom items (non‑stocked, non‑controlled component items) to show the phantom item's components in place of the phantom item itself.

 

It also allows the operator to choose how many levels are to be printed.

 

The options to print active items only and purchased items only are also included.

 

Run Instructions

 

      Select Gross Requirements from the pull down BOMP Reports window.  The following screen will then be displayed:

 

​

 

Gross Requirements Entry Screen

 

 

 The following options are available:

    • Select the desired mode from the Gross Requirements menu bar
    • Enter the data requested on the screen

     

          To return to the menu bar, press the ESC or F10 key. To leave this application, press X for EXIT when positioned at the menu bar.

     

    Entry Field Descriptions

     

    Name

    Type and Description

    1.      Item No

    15 alphanumeric characters.

    Enter the item number of the first parent item for which you wish to print a Gross Requirements Report.

    Press the F7 key to search by item number or press the F8 key to search by item description.   After all of the data is entered for the first parent item and quantity to be evaluated, you may enter as many more as you wish.

    After the first parent item, press the ESC key to delete the parents already entered and begin again.  Press the F1 key to view items already selected for the report.  Press the F10 key to end item selection and print the report.

    2.      Quantity Of Parent

    A standard quantity format.

    Enter the quantity of the parent for which you wish to print the Gross Requirements Report.

    Defaults to 1.

    3.      Location

    2 alphanumeric characters.

    Enter the location for which the report will be printed.  The item entered above must be stocked at the location entered here.

    Defaults to All locations.

    4.      Print Active Items Only?

    Y or N.

    Enter Y to print active items only or N to include active, forecasted and obsolete items.

    This field defaults to Y.

    5.      Purchased Or Manufactured?

    1 alphanumeric character.

    Valid entries are:

    P = Purchased

    M = Manufactured

    B = Both

    Enter P to print only purchased items; M to print only manufactured items, or B to print both.

    Defaults to P.

    6.      Print Shortages Only?

    Y or N.

    Enter Y to only print items for which a shortage exists.  Enter N to print all items.

    This allows you to easily see the items that require additional inventory to meet the specified requirements.

    Defaults to N.

    7.      Number Of Levels To      Explode?

    2 numeric digits (99).

    Enter the number of levels you wish to see.

    Default is 11.

    8.      Blow Through Phantom    Items?

    Y or N.

    Component items, which are neither stocked nor controlled, are known as phantom items.  Answering Y to this question allows you to blow through phantom items to the real component items, which are down one level.

    Default is N.

    9.      Reflect Scrap Factor In Qty?

    Y or N.

    If Y is entered, the shrink/scrap factor entered in the Product Structure File Maintenance application will be included in the calculation of the quantity-required field in the report.

    10.    Effectivity Date

    A date in the standard date format.

    Enter the effectivity date you wish to use for printing items. This date will be used to determine whether to include or exclude items. If you press RETURN, no selection will be made based upon effectivity date.

    You will not be prompted to enter this field unless you answer N to Print Active Items Only?

    Default is no selection based on effectivity date.

     

    Print Gross Requirements Report

     

     

     

    Function Key Options for Multiple Parents

     


     

    Work File Search Pop-up Window

     

     

                                           


      • Related Articles

      • Feature - Gross Requirements Report COP Order Import

        Date Released - 5/24/16 The feature will allow the user to import COP line items to the BOMP Requirements Work File. When running the Bill of Material Processor-> Reports-> Gross Requirements Report, a new option is available from the item number ...

      • Feature - Gross Requirements Report Item/Qty CSV Import

        Date Released - 5/23/16 The feature will allow the user to import an CSV file containing a list of items and the quantity of the parent. This CSV file should contain two columns - the item number and the quantity of the parent. When running the Bill ...

      • Feature - Gross Requirements to Use COP Order Customized Structure

        Release Date: 03/25/2022 Version: 8.5 & Higher In the COP Order Entry Line Item Screen, the user can press "F4=Custom Prod Stru" key to customize the components needed to produce the parent item for this order. See sample screen below: In BOMP -> ...

      • IM32S1 Inventory Management Kit Gross Requirements Report

        Kit Gross Requirements Report Application Overview The Kit Gross Requirements Report application prints the requirements for each component for a selected quantity of a kit item or items. The report allows the user to see how many of each component ...

      • BM0000 Bill of Material Package Overview

        BM0000 Bill of Material Package Overview ← Bill of Material / Work Order Plus Overview Package Overview How To Use This Manual When most people receive a new product, they want to use it right away. Unfortunately, this is not quite possible when ...